Магазин: Описание
|
Model:JM800S-30 |
|
|
Operating system |
embedded LINUX |
|
Main processor |
MSTAR338Q |
|
Image Sensor |
SONY IMX415 1/2.8″ Ultra Low Illumination CMOS Sensor |
|
Day and night mode |
Support |
|
Compression standard |
|
|
Compression standard |
Video compression algorithm supports H.265, H.264 High Profile, H.264 Main Profile and H.264 Baseline |
|
Audio compression algorithm |
G.726/G.711 |
|
Compressed transport stream |
512Kbps-12288bps, can be customized, |
|
Images |
|
|
Maximum image size |
8MP (3840*2160) |
|
Sharpness Special function |
First stream:4K 8MP (3840*2160),3072*1728，2592*1944，2560*1440，2304*1296，1080P,720P support fog function, support WDR, HDR. Support strong light suppression function. |
| Second stream：720*480，VGA,640*360,480*360,CIF | |
|
Video frame rate |
8mp 20fps,3072*1728，2592*1944，2560*1440，2304*1296，1080P,720P 30fps |
|
Character overlay |
Support OSD name,time and date information overlay |
|
Image settings |
Brightness, contrast, saturation, exposure, up and down reverse, left and right mirroring adjustable |
|
Network Function |
|
|
Storage function |
Supports up to 256G Micro SD card storage and supports scheduled video storage |
|
Motion detection |
Four independent detection areas can be set (sensitivity 1-100 can be set) |
|
Alarm linkage |
alarm sends the picture to the specified mailbox; the alarm uploads the picture and the video is uploaded to the FTP server; |
|
Network Protocol |
Supports TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, RTSP，RTMP. |
|
Access Protocol |
Supports ONVIF 2.4 Protocol |
|
Interface |
|
|
Audio input |
support External MIC |
|
Audio output |
External speaker |
|
LAN interface |
RJ45 10Base-T/100Base-TX, |
|
IR night distance |
support |
|
LEN |
36x zoom,4.4-129mm |
|
waterproof level |
indoor |
|
WIFI |
not support |
|
Working temperature |
-40 to +85 Celsius |
|
power |
DC12V 1A |
|
Working Humidity |
-10-95% |
About the protocol specification of the camera sent to the external MCU to control the lighting：
Data is sent through CN2: TXD1 UART1 (Pleco-d, 9600)
IRCUT status：0: color, 1:B/W
IRCUT model：0：Automatic control mode (day and night determined by SENSOR)
1：Day and night mode, control according to the time period
2：External control mode (this mode is the traditional camera control mode, the MCU sends the VISCA command to control the camera IRCUT mode, in this mode, the camera
will not send the command to the MCU)
3：Manual control mode
Light control PWM:
IR LED PWM: Infrared LED power 0-100 decimal, 0: close infrared LED, 100 maximum infrared LED brightness
White LED PWM: White LED power 0-100, decimal, 0 closes white LED, 100 maximum white LED brightness
For example:
IRCUT Auto Mode (Daytime):FF 01 83 01 00 00 11 00 96
IRCUT Auto Mode (Night — Pure Infrared) :FF 01 83 01 01 00 C6 00 4C
IRCUT automatic mode (pure white light at night):FF 01 83 01 00 00 E5 00 6A
IRCUT Auto Mode (Dual Light Night Infrared) :FF 01 83 01 01 00 ED 00 73
IRCUT automatic mode (dual light night white light) :FF 01 83 01 00 00 19 00 9E
Manual mode (daytime) :FF 01 83 01 00 03 07 00 8F
Manual mode (pure infrared at night):FF 01 83 01 01 03 EC 00 75
About P/T bracket
How to Programming Return Home position:
76+set+1+call for Turn on Return Home position
76+set+2+call for Turn off Return Home position
When this function is turned on, after waiting for 5 minutes, the PT bracket will automatically return to the Home position
74+set+1+call :The bracket turns on the self-check function when the power is connected or after the power is turned off and restarted
74+set+2+call : The bracket turns off the self-check function when the power is connected or after the power is turned off and restarted
94+call : restart bracket
82+call :Reset P/T bracket
Mobile APP Name:AC18PRO
Record video playback supports 16X fast forward
IPCAM-B93ECB-MC800S_V2_AF, 192.168.37.37, F0-00-00-CB-FB-9F, JM800S-D_AF_V3-A_YSSD-RTMP-GB-DH-H5 V3.2.0.3 build 2022-10-08 14:55:24,
О кронштейне P/T (отдельно купить)
Как программировать вернуться домой положение:
76 + набор + 1 + вызов для включения возврата домой
76 + набор + 2 + вызов для выключения возврата домой
Когда эта функция включена, после ожидания в течение 5 минут кронштейн PT автоматически вернется в исходное положение
74 + набор + 1 + вызов: кронштейн включает функцию самопроверки при подключении питания или после выключения питания и перезапуска
74 + набор + 2 + вызов: кронштейн выключает функцию самопроверки при подключении питания или после выключения питания и перезапуска
94 + вызов: кронштейн для перезапуска
82 + вызов: кронштейн сброса P/T
Название мобильного приложения: AC18PRO
